{Chrysler 300} Re: Parking brake 300G

[Nick Taylor <nicksgaragesd@xxxxxxxxx>]

Both the shoes and the cable are adjustable. Here is the shoe adjustment procedure from the service manual.

Adjustment

(1) Remove the adjusting screw cover plate. 

(2) Turn the brake shoe adjusting nut, as shown in Figure 3, to decrease shoe-to-drum clearance until a slight drag is felt on the drum. Back off the adjusting nut at least one full notch (using spanner wrench Tool C-3723) or until brake drum is free. Be sure the two raised shoulders on the adjusting nut are seated in the grooves on the adjusting sleeve.

(3) Test the parking brake lever for travel. When properly adjusted, there should not be more than 3*4 inches of parking brake pedal travel. Never substitute a brake shoe adjustment by adjusting the cable. 

(4) Install the adjusting screw cover plate.   

On Tuesday, July 6, 2021 at 10:18:43 AM UTC-7 Tim wrote:

Hello Brain Trust

My parking brake in the 300G is barely holding the car...def not on any slope.

Is it adjustable? Easy fix? Diagnosis hints? Thx. Tim

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/66334eee-1b6d-421f-9fd8-fc9e0a1f87d6n%40googlegroups.com.