RE: {Chrysler 300} Re: 1964 voltage limiter/ temperature gauge

["Rich Barber" <c300@xxxxxxx>]

Agreed.  I custom-fabbed a bezel-turning tool from stiff old black
coat-hanger wire--a vanishing commodity.  Far less scratching than even the
bent-tip needle nose pliers I used for years.

Happy New Year to you and all the 300-ites.

Rich Barber
Raining, again--lakes showing up where they have not been seen for years.
High & dry in Brentwood, CA.


-----Original Message-----
From: D.C. Mason <petergriffinforpresident@xxxxxxxxx> 
Sent: Monday, January 2, 2023 5:34 PM
To: Rich Barber <c300@xxxxxxx>
Cc: Bob Merritt <bob@xxxxxxxxxxxxx>; John Grady <jkg@xxxxxxxxxxxxxxxxx>;
chrysler 300 club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Re: 1964 voltage limiter/ temperature gauge

Thanks Rich.  I should probably also add a couple tips for any younger
members who may be pulling a 63/64 instrument cluster:
1) use some tape to protect the lower dash pad as pictured and
2) you can use a couple nails and a screwdriver to remove the bezels for the
wiper switch and headlight switch as pictured.  
 


-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/015401d91f17%2446932ea0%24d3b98be0%24%40ez2.net.