{Chrysler 300} Oil pressure senders for 300F?

["'Keith Langendorfer' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Folks

The needle for the oil pressure gauge in our F stays pegged at the far right when running and guessing it’s the sending unit. I see that Napa has an Echlin unit for about $54 and a Napa brand for about  $21, which is a huge variance. 

They look the same on the web page but wondering if the group has any thoughts on significant differences?

Thanks in Advance, 

Keith
PS: I did buy a new voltage regulator a while back because someone said that could also be the problem but I haven’t installed it as was thinking the sending unit might be more plausible as a the culprit. 

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1DFADD24-53C4-4F67-8F46-BE662F884372%40yahoo.com.