Re: {Chrysler 300} Cross ram removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} Cross ram removal



No intake bolts on B engines go into coolant passages. Rick

Sent from my Verizon, Samsung Galaxy smartphone
Get Outlook for Android

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> on behalf of Nick Taylor <nicksgaragesd@xxxxxxxxx>
Sent: Friday, August 8, 2025 7:45:07 PM
To: Jay Williamson <letterpressman@xxxxxxxxxx>
Cc: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Cross ram removal
 
I can't remember if some of the intake bolts go into cooling passages. It wasn't too hard getting the rams off mine when I had to replace a bent push rod. The car didn't have too many miles on it after the engine was redone in the 90s so I didn't have any struggles with bolts.

On Fri, Aug 8, 2025, 1:06 PM 'Jay Williamson' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:
Just to tag on an earlier post, I’m getting ready to perform a task that I’m not really looking forward to and that is removing the cross ram intake on my 300F. The shop manual says to drain the cooling system. My question is, why would I need to do that? I’m not removing the heads. If I can save a step, that would be great.

Thanks
Jay Williamson
Sent from my iPad

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/3A39984C-F5A1-443E-874B-6E11AB16DAA8%40icloud.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFOOsRMNoPxY6sN%3D9d8c-HSZBa27Y9TQCA%2B4beQg_r12%3Dw%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/SN6PR20MB35680DDD748C5D8D5BD38E38D42EA%40SN6PR20MB3568.namprd20.prod.outlook.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.