Re: {Chrysler 300} 1962 300H Carb. Inter-Connecting Rod

[Nick Taylor <nicksgaragesd@xxxxxxxxx>]

It doesn't seem to matter. It will function the same way.

On Mon, Sep 1, 2025, 11:37 AM 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Anyone know what is the correct position on how to connect the Inter-Connecting Rod in between the Carburetors?

I ask, as I have seen the Slotted End positioned on both the Front Carb and / or the Rear Carb.

The shop manual contradicts itself in that….

fuel

PDF Document · 2.4 MB

Page 14-36 - Section (i):

Reads like this….

Install the inter-connecting rod with the slotted end connected at the lower hole in the throttle lever of the front carburetor, and the other end connected at the top hole of the rear carburetor throttle lever.

Page 14-44:

Pictures shows it connected the opposite way as above.

Thanks for any resolve to the mystery.

Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/260E1AC0-F790-4A6A-B062-CF96A716814F%40yahoo.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFOHTn1XStZUq%2B8ZmLVTx3krddMKTv-EEQoMaQeXNvONUA%40mail.gmail.com.