Re: {Chrysler 300} 300F Exhaust Manifold Needed

["'dave mason' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Have heard this many times from club members- Hope the exhaust shop didn’t hang the exhaust pipes from the manifold unsupported.  That will crack the manifold.   One reason they are so rare.   

If you haven’t already, tell them asap not to do that on the right side or you’ll be looking for both manifolds.  

Sent from my iPhone

On Nov 6, 2025, at 09:57, Robert Kelley <rbtkelley@xxxxxxxxx> wrote:

Good Morning All!

When installing a new Waldon's exhaust system the Left Side engine exhaust manifold is cracked in the flange area. If I am understanding the parts manual correctly the p/n is 1947-432. for the ram set-up.. 

I also will consider a work around manifold, until a ram manifold is located as the car is presently at a custom exhaust fabrication shop. 

Bob Kelley

414-651-4180

Waukesha, WI 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/0122f9b3075081d08ff2f5f356470326d3889156%40webmail.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/B226B5BA-4B68-4FBE-ABD6-74C8B27B4672%40yahoo.com.