{Chrysler 300} 1970 Chrysler 300 Convertible

[William Huff <whuff@xxxxxxxxxx>]

Howdy Folks,

Changing out the rear bumper and making some rust repairs.  A couple of 
the SS clad bumper bolts were scarred during the disassembly.  I have 
found lots of bumper bolts for sale, but most have a problem.  Some have 
a much larger crown than mine, which are flatter, and the flatter ones 
have a smaller head than mine, which might not fully cover the hole. So 
I am looking for a source for new or good used bolts.  7/16" x 1 1/4" 
with a 1" head.

Also, the silver background for the tail light bulbs, inside the lenses, 
is pretty dull.  Any recommendations for a paint to brighten things up?

Thanks,

Bill Huff

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/b1af95e9-0b01-4b0b-b92a-1b84948fcaa8%40cfl.rr.com.