{Chrysler 300} 300F brake dragging

[Tom Wilburn <tomwilburn1@xxxxxxxxx>]

After repairing a leak at the master cylinder and bleeding my car would pull to the right on braking. 

Then on my last trip my right front brake remained engaged after braking. 

Fortunately I was a few blocks from home and was able to continue slowly. 

Here is a photo - I expected to see a broken spring but everything looks normal. Both wheel cylinders extend and retract when I lightly press the pedal. 

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/8003FBF3-74E1-4E73-BFC7-6DD5CCDF5FB6%40gmail.com.

Ideas? 

Sent from my iPhone

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/8003FBF3-74E1-4E73-BFC7-6DD5CCDF5FB6%40gmail.com.