------------------------ Yahoo! Groups Sponsor ---------------------~-->
Yahoo! Autos. Everything you need to know about buying or selling a car. FREE Quotes, 360° Tours, Research,
Blue Book, Compare Vehicles, Buy Used
http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/8LmulB/TM
---------------------------------------------------------------------~->
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
------------------------------------------------------------------------
There are 8 messages in this issue.
Topics in this digest:
1. Re: High Speed Starters For Chrysler 300s '55-'65
From: Tony Rinaldi <awrdoc@xxxxxxxxx>
2. The Nordic Chapter Website
From: Mikael Färdig <mickefardig57@xxxxxxxxxxx>
3. Forgot
From: Mikael Färdig <mickefardig57@xxxxxxxxxxx>
4. Automotive calculations - toolbox
From: "Vath, Michael J." <mjvath@xxxxxxxxx>
5. Newsletter Writeup
From: pennsy300@xxxxxxx
6. Re: FW: Any Interest in a High Speed Starter for 413CastIron 727 DriveTrains?
From: paul holmgren <paulholm@xxxxxxxxxxxxx>
7. Fw: Reply from Roadrunner Starters/High Speed Starters For Chrysler 300s '55-'65
From: "Owen & Jo Grigg" <ram300@xxxxxxxxxx>
8. Re: Kevin Adams I ripped someone off rubuttal/ I lose
From: "Larri Stumpf" <moparlarri76@xxxxxxxxxxx>
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: Tue, 09 Sep 2003 10:03:32 -0400
From: Tony Rinaldi <awrdoc@xxxxxxxxx>
Subject: Re: High Speed Starters For Chrysler 300s '55-'65
Hi Tim,
This is a response to your request for OE#s for our Chrysler 300s:
1955: 1527689
1956: 1642140
1957/58 : 1842562
1959 thru 61: 1889200
There also was a #1604 480 suggested for 1955. Wonder if this was a 6V/12V
issue.
Our understanding is that Road Runner Starters does manufacture high speed
starter alternatives for our vehicles. Please "reply all" to this e-mail. I
am asking Owen Grigg to post your reply to the Chrysler 300 list server
since I will be out of town and going to the Auto Fair in Charlotte NC until
Sept. 16th.
Please quote the specs and all available information for the respective high
speed starters and include terms and conditions, pricing, warranty info and
availability for your high speed starter replacements. You may also consider
listing your offerings for '62-'65 even though these are more readily
available.
Since there are so many members that may take advantage of your services, we
ask that you work on a special pricing list for members of the Chrysler 300
Club, Int.
Thank you, in advance,
Tony Rinaldi
> From: Road Runner Starters <tim.wood@xxxxxxxxxxxx>
> Date: Mon, 08 Sep 2003 09:00:18 +1200
> To: Tony Rinaldi <awrdoc@xxxxxxxxx>
> Subject: Re: [Chrysler300] Any Interest in a High Speed Starter for
> 413CastIron 727 DriveTrains?
>
> Hi Tony, we manufacture a number of high performance starters to suit the
> early Mopars.
> There are 3 different starters that pre date the 62 and later T/Flite
> starters, there are also 2 different
> pitch 9 tooth pinions (25mm dia. and 29mm dia.this does'nt include
> commercial,industrial and marine of which there are more!) E-mail the OE
> part #'s you are after and we'll
> go from there. Thanks for the inquiry. Regards Tim.
> ----- Original Message -----
> From: Tony Rinaldi <awrdoc@xxxxxxxxx>
> To: Owen & Jo Grigg <ram300@xxxxxxxxxx>; <tim.wood@xxxxxxxxxxxx>
> Cc: Chrysler 300 Club <Chrysler300@xxxxxxxxxxxxxxx>
> Sent: Saturday, September 06, 2003 1:24 AM
> Subject: Re: [Chrysler300] Any Interest in a High Speed Starter for
> 413CastIron 727 DriveTrains?
>
>
>> Hi Tim,
>>
>> Owen Grigg suggested that I contact you and see if you can help us owners
> of
>> '59-'61 with Chrysler 413 wedge/cast iron 727 TF drive trains get high
> speed
>> starter replacements. Also '55-'58 hemi drive trains.
>>
>> The '59-'61 set ups have longer drive shafts and cannot interchange with
> the
>> available high speed starters that are compatible with the '62 and later
>> aluminum TFs which fit the shortened drive shafts of the later 413s.
>>
>> Tony Rinaldi
>>
>>> From: "Owen & Jo Grigg" <ram300@xxxxxxxxxx>
>>> Date: Fri, 5 Sep 2003 14:26:21 +1200
>>> To: "Tony Rinaldi" <awrdoc@xxxxxxxxx>
>>> Subject: Re: [Chrysler300] Any Interest in a High Speed Starter for
> 413Cast
>>> Iron 727 DriveTrains?
>>>
>>> Tony,
>>> If you would like to speak with someone who knows all about these high
>>> speed, high torque starters, contact Tim at Roadrunner Starters on
>>> tim.wood@xxxxxxxxxxxx
>>> Owen
>>> ----- Original Message -----
>>
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Tue, 09 Sep 2003 16:23:44 +0200
From: Mikael Färdig <mickefardig57@xxxxxxxxxxx>
Subject: The Nordic Chapter Website
Hi everybody.
Finally we have our new website ready for the public.
Still, the main part is swedish, but will soon be multilangual.
Please have a look at it and tell us what you think about it.
The forum is english, so if you register as a member you will be able to
join and talk.
We have a classifieds area in the forum aswell.
http://www.chrysler300.com/user.php?op=register&module=NS-NewUser , that
link will get you to the registry page.
A small swedish dictionary for the reg. page.
Användar ID: = User ID
Lösenord = Password
Lösenord Igen: = Type password again
E-post-adress = Your email
Din E-post igen: = Type your email again
DON'T forget to fill in this box.
"Jag godkänner denna hemsidas användarvillkor och personuppgiftspolicy."
Otherwise you will not get registred.
----Need any help with this, dont hesitate to mail me----
The Gallery side isnt reallt finnished yet. But soon enough. There we will
show all Nordic members cars and projects.
Have a nice day !
Sincer.
Mikael Färdig / Sweden
_________________________________________________________________
Lättare att hitta drömresan med MSN Resor http://www.msn.se/resor/
________________________________________________________________________
________________________________________________________________________
Message: 3
Date: Tue, 09 Sep 2003 16:29:11 +0200
From: Mikael Färdig <mickefardig57@xxxxxxxxxxx>
Subject: Forgot
The URL for the Nordic Site is ofcourse
;)
-micke
_________________________________________________________________
Hitta rätt på nätet med MSN Sök http://search.msn.se/
________________________________________________________________________
________________________________________________________________________
Message: 4
Date: Tue, 9 Sep 2003 11:24:41 -0400
From: "Vath, Michael J." <mjvath@xxxxxxxxx>
Subject: Automotive calculations - toolbox
A chevy guy passed this link along to me...Its a pretty nifty collection of on-line tools for computing speed / torque / displacement / etc.
Maybe valuable when driving through speed traps without a functioning speedo....
> http://corvetteactioncenter.com/tech/tools/index.html
________________________________________________________________________
________________________________________________________________________
Message: 5
Date: Tue, 9 Sep 2003 17:57:22 EDT
From: pennsy300@xxxxxxx
Subject: Newsletter Writeup
This is McTaggart. Is there anyone out there who participated in the Dayton
dragstrip activities that would be willing to volunteer to put together a
brief newsletter writeup of this event? Including, if possible, the names and
cars of those who ran ther cars and their times? Let me know , OK? Thanks
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 6
Date: Tue, 09 Sep 2003 17:33:18 -0500
From: paul holmgren <paulholm@xxxxxxxxxxxxx>
Subject: Re: FW: Any Interest in a High Speed Starter for 413CastIron 727 DriveTrains?
Owen & Jo Grigg wrote:
> Think Tim works off the numbers on the actual starter and more likely the
> Autolite #.
> '57 & '58 Autolite #MDL 6001 and Chrysler #1689 342
This information lifted directly from my Autolite service parts catalog
covering 1946 to 1957
1955 autolite # MCL-6304 6V C67, C68, C69
1955 autolite # MDC-6301 12V C70
1956 autolite # MDF-6001 12V all models
1957 autolite # MDL-6001 12V C75, C76 (includes 300's)
the catalog does show some 12V parts starting in 1953
The Original 6V field coil package was Autolite # 20-23
the same from 1946 to 1955
--
Paul Holmgren
Hoosier Corps #33, L-6
2 57 300-C's in Indy
________________________________________________________________________
________________________________________________________________________
Message: 7
Date: Wed, 10 Sep 2003 20:06:48 +1200
From: "Owen & Jo Grigg" <ram300@xxxxxxxxxx>
Subject: Fw: Reply from Roadrunner Starters/High Speed Starters For Chrysler 300s '55-'65
Hi all
Below is Tim's reply. I have forwarded on the Autolite #'s supplied by Paul
Holmgren to help identify the starters. If anyone on the list has the #'s
tagged/stamped ON the '59-'61 starter could they send them to me as I'm
sure in my pile of starters I have one. I would then send it down to Tim,
which would mean he'd have samples covering at least '56 w/TF thru '61.
Thanks
Owen
----- Original Message -----
From: Road Runner Starters <tim.wood@xxxxxxxxxxxx>
To: Owen & Jo Grigg <ram300@xxxxxxxxxx>
Sent: Wednesday, September 10, 2003 3:03 PM
Subject: Re: High Speed Starters For Chrysler 300s '55-'65
> Hi Owen,
>
> 1955/6 : can't find these # 's but will keep trying (I suspect for 12v
you
> can use "57" starter)
> with earlier 9t 29mm pinion. Our part # RS109D US$188 +
> Shipping) To confirm
> can someone e-mail some measurements off an OE starter.
> 1957/8 : RS109C US188 + Shipping. Replaces 1689342 MDL6001 , unsure
about
> 1842562
> but suspect they are the same.
> 1959/61 : RS109E (mounting holes offset to starter centreline, 4" centre
to
> centre, 3.25" spigot
> into bellhousing, 9 tooth 25mm pinion.) US$188 + Shipping.
> 1962 :RS709 US$188 +Shipping.
>
> I Hope this helps, any questions or further info. please e-mail.
>
> Shipping is US$56 for 4-10 day delivery or US$48 for 11-25 day delivery.
>
> Kind regards,
>
> Tim Wood.
>
> ----- Original Message -----
> From: Tony Rinaldi <awrdoc@xxxxxxxxx>
> To: Road Runner Starters <tim.wood@xxxxxxxxxxxx>
> Cc: Owen & Jo Grigg <ram300@xxxxxxxxxx>; Chrysler 300 Club
> <Chrysler300@xxxxxxxxxxxxxxx>; John Hertog <crossram@xxxxxxxxxxxxx>;
Warren
> R Anderson <wranderson@xxxxxxxxxxxxx>; Charlie Valentine
> <cross.ram@xxxxxxxxxxx>; <fabe7445@xxxxxxxxxxxxx>
> Sent: Wednesday, September 10, 2003 2:03 AM
> Subject: Re: High Speed Starters For Chrysler 300s '55-'65
>
>
> > Hi Tim,
> >
> > This is a response to your request for OE#s for our Chrysler 300s:
> >
> > 1955: 1527689
> > 1956: 1642140
> > 1957/58 : 1842562
> > 1959 thru 61: 1889200
> >
> > There also was a #1604 480 suggested for 1955. Wonder if this was a
6V/12V
> > issue.
> >
> > Our understanding is that Road Runner Starters does manufacture high
speed
> > starter alternatives for our vehicles. Please "reply all" to this
e-mail.
> I
> > am asking Owen Grigg to post your reply to the Chrysler 300 list server
> > since I will be out of town and going to the Auto Fair in Charlotte NC
> until
> > Sept. 16th.
> >
> > Please quote the specs and all available information for the respective
> high
> > speed starters and include terms and conditions, pricing, warranty info
> and
> > availability for your high speed starter replacements. You may also
> consider
> > listing your offerings for '62-'65 even though these are more readily
> > available.
> >
> > Since there are so many members that may take advantage of your
services,
> we
> > ask that you work on a special pricing list for members of the Chrysler
> 300
> > Club, Int.
> >
> > Thank you, in advance,
> >
> > Tony Rinaldi
> >
> > > From: Road Runner Starters <tim.wood@xxxxxxxxxxxx>
> > > Date: Mon, 08 Sep 2003 09:00:18 +1200
> > > To: Tony Rinaldi <awrdoc@xxxxxxxxx>
> > > Subject: Re: [Chrysler300] Any Interest in a High Speed Starter for
> > > 413CastIron 727 DriveTrains?
> > >
> > > Hi Tony, we manufacture a number of high performance starters to suit
> the
> > > early Mopars.
> > > There are 3 different starters that pre date the 62 and later T/Flite
> > > starters, there are also 2 different
> > > pitch 9 tooth pinions (25mm dia. and 29mm dia.this does'nt include
> > > commercial,industrial and marine of which there are more!) E-mail the
OE
> > > part #'s you are after and we'll
> > > go from there. Thanks for the inquiry. Regards Tim.
> > > ----- Original Message -----
> > > From: Tony Rinaldi <awrdoc@xxxxxxxxx>
> > > To: Owen & Jo Grigg <ram300@xxxxxxxxxx>; <tim.wood@xxxxxxxxxxxx>
> > > Cc: Chrysler 300 Club <Chrysler300@xxxxxxxxxxxxxxx>
> > > Sent: Saturday, September 06, 2003 1:24 AM
> > > Subject: Re: [Chrysler300] Any Interest in a High Speed Starter for
> > > 413CastIron 727 DriveTrains?
> > >
> > >
> > >> Hi Tim,
> > >>
> > >> Owen Grigg suggested that I contact you and see if you can help us
> owners
> > > of
> > >> '59-'61 with Chrysler 413 wedge/cast iron 727 TF drive trains get
high
> > > speed
> > >> starter replacements. Also '55-'58 hemi drive trains.
> > >>
> > >> The '59-'61 set ups have longer drive shafts and cannot interchange
> with
> > > the
> > >> available high speed starters that are compatible with the '62 and
> later
> > >> aluminum TFs which fit the shortened drive shafts of the later 413s.
> > >>
> > >> Tony Rinaldi
> > >>
> > >>> From: "Owen & Jo Grigg" <ram300@xxxxxxxxxx>
> > >>> Date: Fri, 5 Sep 2003 14:26:21 +1200
> > >>> To: "Tony Rinaldi" <awrdoc@xxxxxxxxx>
> > >>> Subject: Re: [Chrysler300] Any Interest in a High Speed Starter for
> > > 413Cast
> > >>> Iron 727 DriveTrains?
> > >>>
> > >>> Tony,
> > >>> If you would like to speak with someone who knows all about these
high
> > >>> speed, high torque starters, contact Tim at Roadrunner Starters on
> > >>> tim.wood@xxxxxxxxxxxx
> > >>> Owen
> > >>> ----- Original Message -----
> > >>
> >
>
>
>
________________________________________________________________________
________________________________________________________________________
Message: 8
Date: Wed, 10 Sep 2003 04:48:52 -0700
From: "Larri Stumpf" <moparlarri76@xxxxxxxxxxx>
Subject: Re: Kevin Adams I ripped someone off rubuttal/ I lose
After another month(actually longer) and several phone calls(left
messages,calls never returned)and e-mails(never returned) I,ll just say "I
lose".KEVIN ADAMS ripped me off! I asked for help with my 300 from the club,
dealt with three different members; one sent me an astrodome instument
cluster that was'nt as described, one member I did some trading with(trades
were okay) then I gave him a pair of early big block heads(shipped them
pronto so that he could make a show) and waited for the money I was out for
shipping for about two months, never did get the full amount and we all know
the Kevin Adams story.I,m really upset with the outcome of my dealings with
the members, am not feeling good about the project. Will put the car up for
sale on e-bay tomorrow.Also the parts from Kevin Adams(who ripped me off and
should be brought up on charges).I guess I should stick to all the other
mopars (I love them and have been restoring them for thirty years) and you
guys can have the 300's.Good luck, larri.
>From: kevin adams <kmotion45@xxxxxxxxx>
>To: chrysler300@xxxxxxxxxxxxxxx
>Subject: [Chrysler300] Kevin Adams I ripped someone off rubuttal
>Date: Sun, 20 Jul 2003 08:32:44 -0700 (PDT)
>
>Hello all, First, there is two sides to every story so
>please allow me to explain mine. i posted my 62 parts
>for sale because they were simply extra stuff. it is
>obvious that my idea of quality does not match his .
>There was never any intent to defraud larri . What i
>shipped him was worth what i charged him for it .
>Selling parts is certainly not worth public scandal
>and my standing in the club . in talking with larri my
>intent was to simply sell all of it as a package and i
>still have one more package to send. However , I will
>refund larri's money upon return of the goods in the
>same condition as sent . Misunderstandings do happen
>, but they can also be fixed . larri can contact me by
>mail or phone anytime. Cordially, Kevin Adams
>
>__________________________________
>Do you Yahoo!?
>SBC Yahoo! DSL - Now only $29.95 per month!
>http://sbc.yahoo.com
_________________________________________________________________
Need more e-mail storage? Get 10MB with Hotmail Extra Storage.
http://join.msn.com/?PAGE=features/es
________________________________________________________________________
________________________________________________________________________
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap