------------------------ Yahoo! Groups Sponsor ---------------------~--> Yahoo! Autos. Everything you need to know about buying or selling a car. FREE Quotes, 360° Tours, Research, Blue Book, Compare Vehicles, Buy Used http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/8LmulB/TM ---------------------------------------------------------------------~-> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx ------------------------------------------------------------------------ There is 1 message in this issue. Topics in this digest: 1. Spark Plug or Ignition Wires From: "Mike Zagata" <mzagata@xxxxxxxxxxx> ________________________________________________________________________ ________________________________________________________________________ Message: 1 Date: Fri, 12 Dec 2003 15:38:32 -0500 From: "Mike Zagata" <mzagata@xxxxxxxxxxx> Subject: Spark Plug or Ignition Wires Hello and Happy Holidays to ALL. I am in the process of having some correct, date-coded ignition wires made for an F or G car (likely the same wires used on a J and K but with later dates). Some of the members have been very helpful to date. However, I would like to get the length measurements by cylinder from an original set of wires. I also need a sample of the wire, the 90 degree boots used on cylinders 5,7,2,4,6, & 8, and the "straight"boots used for numbers 1 & 3. I believe the coil wire is red at the distributor end. Any parts loaned will be returned. This project could result in these wires being made available for sale in the $70 per set range. Thank you in advance for your help. Mike [Non-text portions of this message have been removed] ________________________________________________________________________ ________________________________________________________________________ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>