[Chrysler300] Steering Column - Rubber bushing

[John Hertog <crossram@xxxxxxxxxxxxx>]

Hi Bob,

There is indeed a rubber bushing. And they usually are bad.  The only source
I know of is Gary Goers -  try e-mail at : gary@xxxxxxxxxxxxx    or, better
yet, fax him your order at (406) 752-6249

The steering wheel needs to come off; then the steering shaft outer tube,
leaving the actual steering shaft in place.  Now the bushing is exposed.
When you remove it, the copper "strap" that serves as ground will probably
fall apart into two sections, and you'll have to make a new one.

Sincerely
John Hertog
Sag Harbor NY


----- Original Message ----- 
From: "ROBET MOORE" <bobmooreglendaleaz@xxxxxxxxxxxxxxxx>
To: "300 Club" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Saturday, April 03, 2004 6:16 PM
Subject: [Chrysler300] Rubber bushing


> for a 63 -300
>
> There is a rubber bushing where the steering column fits into the steering
gear box.
>
> I do not have the number for the rubber bushing and /or does anyone know
where to get one?
>
> Thanks
>
> Bob
>
> From the Barn in NM
>
> [Non-text portions of this message have been removed]
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
> Yahoo! Groups Links
>
>
>
>
>



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
     Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/