RE: [Chrysler300] wanted for 62 chrysler

[Doug Warrener <dwarrener@xxxxxxxxxxxx>]

Hi Fern, I will take my H spare to Stockton Wheel tomorrow and compare it
with the wheels they are offering you. Could you let me know who you talked
to so I can contact the same person.  Doug

-----Original Message-----
From: Fern Rivard [mailto:crc@xxxxxxxxxxxxxxx] 
Sent: Monday, May 03, 2004 9:39 PM
To: Doug Warrener
Subject: Re: [Chrysler300] wanted for 62 chrysler


HI Doug:
    I phoned them this afternoon and Bob quoted me $135 per wheel but after
talking to him for a few minutes and him asking me what car it was for, he
came down to $120/wheel which is still on the steep side but then looking at
sand blasting some old rusty wheel, this is probably the better way to go. I
told him that I had paid less than that for brand new magnum 500's for my
300L a few years ago.
    If it's not to much trouble, could you please have a look at those
wheels for me before I commit myself to spending that kind of money. I want
to use the original hubcaps on the 300H as magnum 500's would really be all
wrong and look too tacky for that car.
    I have finally picked the color for the car which is called "silver
lilac" 21966 and codes RR-1. It should go very well with the black leather
interior. That's right out of the 1962  chrysler and imperial ditzler paint
code charts.
    I just got off the phone with George Reihl in Michigan to get the
correct original tranny rebuilt to specs. His labour rates are quite
reasonable as it ranges between $350-500.00 on the aluminum 727 but the
freight from zip 83835 in northern Idaho to him in MIchigan is a real
killer. He described to me as to how he balances those 413 engines to within
2.5 grams so they can really churn the rpm's and hp. It too bad that he's so
far away from me or I would take the engine to him as well but I will likely
take the necessary parts to an engine balancing shop in Calgary Alberta and
get it all re-assembled by my machinist at the local Napa shop.
    Must run for now.  Fern


----- Original Message ----- 
From: "Doug Warrener" <DWarrener@xxxxxxxxxxxx>
To: "'Fern Rivard'" <crc@xxxxxxxxxxxxxxx>
Cc: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, May 03, 2004 10:32 AM
Subject: RE: [Chrysler300] wanted for 62 chrysler


Fern, try Stockton Wheel in Stockton CA. 209-464-7771. I think the size is
15"x6". I work in Stockton and would be happy to check them out for you.
Doug Warrener, Fair Oaks, CA., 300H

-----Original Message-----
From: Fern Rivard [mailto:crc@xxxxxxxxxxxxxxx]
Sent: Friday, April 30, 2004 1:46 PM
To: chrysler300
Subject: [Chrysler300] wanted for 62 chrysler


    Does anyone have a source or know of where I could get the correct seat
belts for a 62 300H chrysler?
    Also is there a source of correct 15 inch steel wheel for one of these
beasts?
    Thanks from Fern






To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
Yahoo! Groups Links





------------------------ Yahoo! Groups Sponsor ---------------------~-->
Yahoo! Autos. Everything you need to know about buying 
or selling a car.  FREE Quotes, 360° Tours, Research,
Blue Book, Compare Vehicles, Buy Used
http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/8LmulB/TM
---------------------------------------------------------------------~->

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
     Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/