Re: [Chrysler300] re wanted 413 pistons and cam

["Steve Galezowski" <stevenlulu@xxxxxxxxxxxx>]

Fern:

There are few sources for 413 pistons. I got my 30 over pistons from
Federal-Mogul. They are stock flat-top cast pistons as we were unable to
locate any off-the-shelf source for higher quality pistons. There are many
modern after-market camshaft possibilities. You should look for a
"single-bolt" cam to fit an RB block. Also a "three-bolt" cam can work too
but you have to change a timing chain sprocket. A huge selection of three
bolt cams are available. I am using a Comp Cams Xtreme Energy hydraulic
262/272 single-bolt cam which has awesome mid-range power 3000-4000 rpm.
Even though its a smallish cam, I find the low-end torque a little weak,
probably due to its 110 degree lobe separation. If I was going to change
cams, I'd go with a smallish roller cam with 112 degree lobe separation;
these are available from Crane in the three-bolt style. But if you have a
manual transmission, I'd highly recommend the same Xtreme Energy cam I'm
running on my automatic.

Steve Galezowski
300L
----- Original Message ----- 
From: "Fern Rivard" <crc@xxxxxxxxxxxxxxx>
To: "chrysler300" <chrysler300@xxxxxxxxxxxxxxx>
Sent: Wednesday, August 25, 2004 1:46 PM
Subject: [Chrysler300] re wanted 413 pistons and cam


    I am in need of some 30T over 413 pistons for my 300H conv.  Does
anyone have a set for sale or what is a good source to get them from?
    Also, what to do with the cam and solid lifters, should I be getting
the cam reground and where?  Also is there is newer more modern
replacement available for this now?
    Thanks from Fern





To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
Yahoo! Groups Links







------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Autos. Everything you need to know about buying 
or selling a car.  FREE Quotes, 360° Tours, Research,
Blue Book, Compare Vehicles, Buy Used
http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/