[Chrysler300] Spinner Hubcaps and Rims '65-'66 300's

["Ryan Hill" <ryan_hillc300@xxxxxxxxxxx>]

Ok all you wheel experts, I have a question about wheel and hubcap 
dimensions. I just finally bought a set of '66 - '67 spinner hubcaps for use 
on my '65 300. Paid a good buck for them and all but one are in pretty nice 
driver condition. Went out to the garage last night to pop them on and 
discovered they are too deep for the wheels on my car. The first one I put 
on bottomed at least 1/4 inch before the beed around the outside but did 
hold in place. The second one won't go on far enough to even stay put to 
admire. Seems either the backspacing is incorrect or the inner wheel design 
protrudes out too far on this particular wheel for the cap to fit. I have 
two sets of '65 14" wheels and have tried the caps on both with no 
diffeerence.

Did the spinner hubcaps come with a wider or different backspaced wheel? Are 
the '66 and up wheels different? Does anyone have a nice single spinner 
hubcap they might want to part with? (All I really need is the outer dish 
portion, the centers are all very nice)

Thank you. Ryan Hill (Vancouver, Canada)




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Autos. Everything you need to know about buying 
or selling a car.  FREE Quotes, 360° Tours, Research,
Blue Book, Compare Vehicles, Buy Used
http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/