Need 300F stainless mouldings
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Need 300F stainless mouldings



Hi Mopar fiends,
Searching for 2 stainless exterior mouldings for my 300F. Mine are too mashed up to revive due to some previous owner's amateur attempt at panelbeating some dings out. 
They are the pieces that go along the rear, and connect the 2 curved pieces on each corner to the licence plate diecast frame.They each have 4 attaching clips with speednuts, and are 23 3/4" long and 1 1/4" wide where they butt up to the bodywork.
Looking at a 1960 Chrysler catalog, it seems that these mouldings were on every 1960 Chrysler, sure looks that way. Sorry, cannot find a # number for these.
Please e-mail me privately if you have both or either that are surplus.
Thanks in advance, and a great 2002 to ya'll,
Dave in New Zealand.



[Non-text portions of this message have been removed]





Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.