THE HUNT is OVER,, at last!!!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

THE HUNT is OVER,, at last!!!



AS some of you know, for the last 5 years I have been searching
for an affordable set of carbs for my 300-C restoration project.
Last year was the first year of the last 5 that I even got a sniff
of any, only to see the chevy "Nuts" pay a LOT of bucks for the
wrong carbs, and they did it 3 times last year.
(all on that great time waster E-bay).

Long have I searched, far have I ranged, many states have I visited.

This weekend I had planed on hitting 3 swaps in 3 states.
Fri. I traveled to Ohio to the Chrysler Classic, turned up empty
handed as far as 57 Chrysler stuff. Sat. I visited the Hoosier
Spring swap. (Just across the county from home)
I started the fateful day covering the event in the reverse order
I have gone through it for the past 5 years (front to back).
In the very first isle I went down I spied a chevy intake with
the WRONG carbs on it. One look is usually all it takes for me to
see that a close examination is NOT in order. Well, one look
and I dropped my umbrella and jaw. Thems were Chrysler carbs!!!!

One of them even was still wearing its' tag. Darn dealer insisted on
selling the set up intact though. BUT I now have the right carbs for
my car at a more realistic $$$. 
(And "The Monster", my original 300-C, is breathing a big sigh of
relief because I don't have to remove those items from it to complete
"Blacky's resto now)

TO top it all off, later I saw another 2x4 set of WCFB carbs.
This time they were on a 50's vintage factory Ford intake.
I looked down the throat, the venturies were TINY. Dont think I
could have fit my finger through them. And I do not have fat hands.
dont see how the motor could have breathed well at all. Seems silly
for Ford to have restricted their motors so much at the time when
the horse power wars were getting under way.

Well, anyway. "My" new carbs are missing a few misc. parts.
Other wise they are in relatively remarkable condition for
what I found (even still has the right linkage and brass gas
line fittings)

Does anyone know if the brass vent tubes are available??
the 2 on the back carb are broken.

The front carb is missing the linkage to the accelerator pump.
According to the Chrysler service bulletin it is called the
throttle connector rod.

I also am now looking for a bakelite cover for the choke as well as
the clamp for the choke tube as depicted in the service bulletin.

In the many years I have been looking for these 2 carbs, I probably
have only seen 3 or 4 Chrysler WCFB's at the swaps I have been to.
And none of those were for the 57-58 years. And the majority I saw
were totally shot. Seems like the chevy people are looking for
the Chrysler carbs as well. They are bigger then what GM bought
to put on their motors. ALL the GM WCFBs I have seen at the swaps
have smaller venturies.

-- 
Paul Holmgren
Hoosier Corps #33, L-6
2 57 300-C's in Indy




Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.