Re: [Chrysler300] G Distributor question

["Don Verity" <d.verity@xxxx>]

Hi Richard,
You will need a spring and spacers from an early distributor. The later
ones are different. The advance rates are similar enough over the whole
60-61 line that anyone should work. The spacers are used to adjust where the
vacuum advance begins. I may have some extra springs, contact me privately
if you need one. I also have a distributor machine that I use to set them
up.
300ly,
Don
----- Original Message -----
From: Richard Osborne <richard@xxxx>
To: <chrysler300@xxxxxxxxxxxxxxx>
Sent: Tuesday, June 25, 2002 9:18 PM
Subject: [Chrysler300] G Distributor question


> Good Evening,
>
> I just put a new vacuum advance on the distributor in my G and noticed
> that the return spring for the advance is missing.
>
> I am wondering if these springs are interchangeable with later model
> springs? I don't have the G spring to compare to another. If it is not
> interchangeable, what is a good source for these and are there diferent
> tensions available to control the rate of advance?
>
> Thanks,
>
> Richard Osborne
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>