Re: [Chrysler300] Fuel line flare?

[Mike Apfelbeck <moparmike@xxxx>]

It's called a "double flaring tool" it should be available at most parts 
houses or tool rental outfits. They are easy to figure out and with a 
little practice you can turn out some really nice looking fuel and brake 
lines.If you work it just right, you can use it to recreate the little 
bulge on the end of the tube where rubber hose slips over to connect it to 
the tank.

Mike

At 12:12 PM 7/6/02 +1200, Owen & Jo Grigg wrote:
> My old 300C fuel line has a type of internal flare (sorry I don't know the 
> correct name) on the pump end, should it have one on the tank end as well?
> Also how the heck do I put these in the new line, what sort of tool do I 
> need and where can I get one? Been told it is similar to a "crox tool"(?) 
> that they use in plumbing but would have to be much smaller for a 5/16 
> fuel line.
> Thanks in advance for the help.
> Owen
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/