RE: [Chrysler300] 68 300 rotor question

["Bill Johnson" <bjj@xxxx>]

Tom

It is my understanding that the answer to your question is NO!
(Unfortunately) As another 68 owner with Budd Disc Brakes, I have followed
numerous threads on both the C-Body list and the Imperial List. Actually
their archives will have a ton of information on it about these. It is
www.imperialclub.com if you want to check. Last I heard before I dropped off
that list was one member was experimenting with a rotor off a 70 vintage
Toyota Supra that was close in specs. Some machining was to be required but
I can't remember all the details. It seemed quite a long shot to me.

Good luck in your search and if you find some at a good price, pick me up 2
as well!

Whiteshoes


________________________________________________________________________
________________________________________________________________________

Message: 16
Date: Wed, 10 Jul 2002 12:24:41 EDT
From: chry67300@xxxx
Subject: 68 300 rotor question

Hello to all,
I have a 68 300 with factory disc brakes. I would like to replace my rotors
with new pieces. I know they are nonexistent. The original 66-68 rotors were
two-piece in design. 68-72(?) were one piece in design and I can get those
NORS. The bearings listed for both are the same parts. Can anyone tell me
form experience if I can use the later rotors? Thank you, Tom