Re: [Chrysler300] Fw: Exhaust sytem providors

["Johnl" <john@xxxx>]

Hi Roger,

Yes I'm out here listening !! I purchased NOS 4 bolt Dodge Truck manifolds and had to have the pipe flanges made. We did a run of several pairs on the flanges and I sold them through the club. My source is now gone for those. The gaskets come in the complete engine set through Felpro. If you need the number separate I can provide.

I found a local shop that did quality work and the prices reflected such. The system was custom built to the car and was worth every penny. It really made a difference in the way the car performs not to mention the attention it draws from the exhaust note.

I've heard stories about someone who does exhaust systems in Florida and it has all been bad. Don't know if it is these folks, but my thought is you will get a better product if you find the right place and stand there and watch them build it.

Just rebuilt the engine in my 300C and purchased a set of Sanderson short headers for it. The car is much healthier now and warrants an exhaust upgrade, so when time and money allows I may do that one as well.

I do have another set of the Dodge Truck manifolds and flanges that I'm saving for that rainy day. Then last but not least I purchased a set of the factory cast headers used on J's and K ram cars with the short ram intakes. For years they have been setting on my shelf and if I ever get the urge they may end up on my F.

Good luck with the hunt,

John Lazenby


----- Original Message ----- 
From: "obiwan10" <obiwan10@xxxx>
To: "Chrysler300 listservice" <chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, November 18, 2002 11:39 AM
Subject: [Chrysler300] Fw: Exhaust sytem providors


> 
> ----- Original Message ----- 
> From: Roger L. Schaaf 
> To: Chrysler300 listservice 
> Sent: Monday, November 18, 2002 9:56 AM
> Subject: Exhaust sytem providors
> 
> 
> I am seeking a recommended supplier of exhaust system components. In particular I would like someone to make up for me the high performance exhaust system for a 56 300 B which was offered the 355 HP optional motor. I do have the exhaust manifolds. John Lazenby if you are listening, I know that you had such a system built for your B. Are you happy with the results and if so provide info?
> 
> Also a friend of mine has need for 3 or 4 complete systems for 57 300 C autos that he is restoring(coupe and convert). Southern Calif would be good, but anywhere is OK.
> 
> Has anyone had experience with Kepich Exhaust out of Florida. I believe that they once advertised in Hemmings and specialized in stainless systems.
> 
> Still looking for provider of 3.07 ring and pinion or complete differential for 300 B.
> 
> Thanks 
> Roger Schaaf
> 300 B in Calif
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
> 
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
> 
> 
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
> 
> 
> 


[Non-text portions of this message have been removed]