
Re: [Chrysler300] Automobile Trailer
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Chrysler300] Automobile Trailer
- From: SADuggan@xxxx
- Date: Sun, 8 Dec 2002 21:35:33 EST
Rusty,
I needed a car trailer about 8 months ago to haul around my 1950 GMC 12'
stakebed (the Hidden Valley Ranch truck). I've found that you are going to
want to go with 5000 pound tandem axles. This gives you a weight rating of
10,000 pounds. The higher weight rating make the trailer more stable.
The "off the rack" flatbed trailers tend to be a little cheap. My advice is
to go to a custom trailer builder, so they can look at your application and
give you the proper trailer.
I looked around to buy a trailer but I ended up building my own trailer. I
went without the dovetail for better clearance, just built longer ramps.
Realize on a 18' trailer a 300 would stick out over the back two feet. I
built my trailer 19', max length without getting too heavy. Diamond plate
steel bed, better strength per weight.
I rented a cheap trailer before and had a harrowing drive from L.A. to
Seattle. White knuckles the whole way. I will never do that again.
Never forget you get what you pay for. It's not easy to replace a 300.
Good Luck,
Sean
Back to the Home of the Forward Look Network
Archive Sitemap