Re: [Chrysler300] 413 Needs

[Mike Apfelbeck <moparmike@xxxx>]

Do you mean the hole in the water pump housing is too large for the guage 
sender ?
Go down to your local hardware store get what is known as a pipe bushing, 
which will have threads on the o/d to match the engine and threads on the 
i/d to match the sending unit.
You can also get a plug for the oil galley there, ask for an inverted pipe 
plug, it will have either a square or hex shaped indentation on the outside 
for the tool to turn it.

Mike

At 10:12 PM 1/13/2003 -0800, jennifer allyn wrote:
> Putting together a 413 for our '62 300 Sport.
>
> I have no faith in the local Napa store and most every other "real"
> parts store has gone out of business.
>
> The Napa store ordered me a new temperature sending unit for a '64 300
> with a gauge, though its too small.
>
> Does anyone know a part number for the correct sending unit?
>
>
>
> Also.
>
> Where the oil sending unit goes, there is also a plug that blocks an oil
> passage.
>
> Does anyone know the specs for the oil passage as I need to buy a new
> plug?
>
>
>
> Thanks!
>
>
>
> [Non-text portions of this message have been removed]
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/