Re: [Chrysler300] Idler pully for 413

[John Hertog <crossram@xxxx>]

Hi Doug,

Contact George Riehl directly - he'll rebuild your idler pulley for you and
do a wonderful job of it. . Seems your car has a/c, correct? Idler pulleys
only on a/c cars.

John


----- Original Message -----
From: <doug_jones@xxxx>
To: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, March 10, 2003 6:59 PM
Subject: [Chrysler300] Idler pully for 413


>
>
> Hi 300ites,
>
> I am searching for a replacement water pump idler pulley for my 1963 413.
It hangs between the alternator mounting and the water pump and tensions the
water pump belt. It seems Mother MoPar built the thing (bearing, D shaped
stud, and pulley) such that it cannot be disassembled, and the bearing on
the one I have is shot. Anybody know a source for these? They must have
made a jillion of them back then, but I am having no luck so far.
>
> Thanks and cheers,
> Doug Jones
> Boulder Creek, CA, just slightly uphill from Jett Ranch
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>