Master Cylinder Acting Up Part II

["Frank Bakanau" <FBAKANAU@xxxx>]

To recap: After a short drive, the brakes drag, and the pedal gets hard. By
cracking the fitting coming off the MC I can release the pressure and drive
some more.

All the hoses are good. So I took the MC off and apart. WOW, it was full
of gunk. Now I hope I can get a kit from NAPA to replace the seals, one-way
valve etc. They just closed so I have to wait till tomorrow. The plan is
to get this one working again, find another (hint) and send it out to White
Post for rebuilding, and swapum when I get it back.

Anyone have a 55 master cylinder??

Regards,

Frank in sunny Eugene