Fw: Reply from Roadrunner Starters/High Speed Starters For Chrysler 300s '55-'65

["Owen & Jo Grigg" <ram300@xxxx>]

Hi all
Below is Tim's reply. I have forwarded on the Autolite #'s supplied by Paul
Holmgren to help identify the starters. If anyone on the list has the #'s
tagged/stamped ON the '59-'61 starter could they send them to me as I'm
sure in my pile of starters I have one. I would then send it down to Tim,
which would mean he'd have samples covering at least '56 w/TF thru '61.
Thanks
Owen
----- Original Message -----
From: Road Runner Starters <tim.wood@xxxx>
To: Owen & Jo Grigg <ram300@xxxx>
Sent: Wednesday, September 10, 2003 3:03 PM
Subject: Re: High Speed Starters For Chrysler 300s '55-'65


> Hi Owen,
>
> 1955/6 : can't find these # 's but will keep trying (I suspect for 12v
you
> can use "57" starter)
> with earlier 9t 29mm pinion. Our part # RS109D US$188 +
> Shipping) To confirm
> can someone e-mail some measurements off an OE starter.
> 1957/8 : RS109C US188 + Shipping. Replaces 1689342 MDL6001 , unsure
about
> 1842562
> but suspect they are the same.
> 1959/61 : RS109E (mounting holes offset to starter centreline, 4" centre
to
> centre, 3.25" spigot
> into bellhousing, 9 tooth 25mm pinion.) US$188 + Shipping.
> 1962 :RS709 US$188 +Shipping.
>
> I Hope this helps, any questions or further info. please e-mail.
>
> Shipping is US$56 for 4-10 day delivery or US$48 for 11-25 day delivery.
>
> Kind regards,
>
> Tim Wood.
>
> ----- Original Message -----
> From: Tony Rinaldi <awrdoc@xxxx>
> To: Road Runner Starters <tim.wood@xxxx>
> Cc: Owen & Jo Grigg <ram300@xxxx>; Chrysler 300 Club
> <Chrysler300@xxxxxxxxxxxxxxx>; John Hertog <crossram@xxxx>;
Warren
> R Anderson <wranderson@xxxx>; Charlie Valentine
> <cross.ram@xxxx>; <fabe7445@xxxx>
> Sent: Wednesday, September 10, 2003 2:03 AM
> Subject: Re: High Speed Starters For Chrysler 300s '55-'65
>
>
> > Hi Tim,
> >
> > This is a response to your request for OE#s for our Chrysler 300s:
> >
> > 1955: 1527689
> > 1956: 1642140
> > 1957/58 : 1842562
> > 1959 thru 61: 1889200
> >
> > There also was a #1604 480 suggested for 1955. Wonder if this was a
6V/12V
> > issue.
> >
> > Our understanding is that Road Runner Starters does manufacture high
speed
> > starter alternatives for our vehicles. Please "reply all" to this
e-mail.
> I
> > am asking Owen Grigg to post your reply to the Chrysler 300 list server
> > since I will be out of town and going to the Auto Fair in Charlotte NC
> until
> > Sept. 16th.
> >
> > Please quote the specs and all available information for the respective
> high
> > speed starters and include terms and conditions, pricing, warranty info
> and
> > availability for your high speed starter replacements. You may also
> consider
> > listing your offerings for '62-'65 even though these are more readily
> > available.
> >
> > Since there are so many members that may take advantage of your
services,
> we
> > ask that you work on a special pricing list for members of the Chrysler
> 300
> > Club, Int.
> >
> > Thank you, in advance,
> >
> > Tony Rinaldi
> >
> > > From: Road Runner Starters <tim.wood@xxxx>
> > > Date: Mon, 08 Sep 2003 09:00:18 +1200
> > > To: Tony Rinaldi <awrdoc@xxxx>
> > > Subject: Re: [Chrysler300] Any Interest in a High Speed Starter for
> > > 413CastIron 727 DriveTrains?
> > >
> > > Hi Tony, we manufacture a number of high performance starters to suit
> the
> > > early Mopars.
> > > There are 3 different starters that pre date the 62 and later T/Flite
> > > starters, there are also 2 different
> > > pitch 9 tooth pinions (25mm dia. and 29mm dia.this does'nt include
> > > commercial,industrial and marine of which there are more!) E-mail the
OE
> > > part #'s you are after and we'll
> > > go from there. Thanks for the inquiry. Regards Tim.
> > > ----- Original Message -----
> > > From: Tony Rinaldi <awrdoc@xxxx>
> > > To: Owen & Jo Grigg <ram300@xxxx>; <tim.wood@xxxx>
> > > Cc: Chrysler 300 Club <Chrysler300@xxxxxxxxxxxxxxx>
> > > Sent: Saturday, September 06, 2003 1:24 AM
> > > Subject: Re: [Chrysler300] Any Interest in a High Speed Starter for
> > > 413CastIron 727 DriveTrains?
> > >
> > >
> > >> Hi Tim,
> > >>
> > >> Owen Grigg suggested that I contact you and see if you can help us
> owners
> > > of
> > >> '59-'61 with Chrysler 413 wedge/cast iron 727 TF drive trains get
high
> > > speed
> > >> starter replacements. Also '55-'58 hemi drive trains.
> > >>
> > >> The '59-'61 set ups have longer drive shafts and cannot interchange
> with
> > > the
> > >> available high speed starters that are compatible with the '62 and
> later
> > >> aluminum TFs which fit the shortened drive shafts of the later 413s.
> > >>
> > >> Tony Rinaldi
> > >>
> > >>> From: "Owen & Jo Grigg" <ram300@xxxx>
> > >>> Date: Fri, 5 Sep 2003 14:26:21 +1200
> > >>> To: "Tony Rinaldi" <awrdoc@xxxx>
> > >>> Subject: Re: [Chrysler300] Any Interest in a High Speed Starter for
> > > 413Cast
> > >>> Iron 727 DriveTrains?
> > >>>
> > >>> Tony,
> > >>> If you would like to speak with someone who knows all about these
high
> > >>> speed, high torque starters, contact Tim at Roadrunner Starters on
> > >>> tim.wood@xxxx
> > >>> Owen
> > >>> ----- Original Message -----
> > >>
> >
>
>
>