A leak into the booster from the MC is due to the seal on the rear of the MC leaking---- nothing to do with the booster except that the only way I know to get one of the seals is to buy the complete new kit from Jim. As I remember they look just like the wheel cylinder seals but are different size. ----- Original Message ----- From: "Narve Nordanger" <narve.n@xxxxxxx> To: <barber@xxxxxxxxx> Cc: "Chrysler 300 list service" <chrysler300@xxxxxxxxxxxxxxx> Sent: Saturday, March 05, 2005 1:15 PM Subject: SV: [Chrysler300] Master Cylinder-1955 C300 > > Rick, > a guy called Jim Fredrick of MN has been advertising MC rebuilding kits > for > the '55s in the WPC Club for years ( estatecars@xxxxxxxxxxxxx ). After 20 > years of looking for parts for my '55 I have never seen anyone else > listing > these, I also believe this guy made them after realizing he could not > obtain > it anywhere for his personal car. Have no idea about what he charges for > it > today. > > Myself I bought one kit 18 years ago from Jim Fredricks, which worked fine > for 15 years, but lately the MC has been seeping fluid into the booster. > So > on my shelf is a rebuilt MC/booster set-up from one of those > re-sleeve/rebuild companys, awaiting to replace the old unit. > > As for running on drums, a good tip when rebuilding is to have the company > resurfacing the shoes to grind them to a perfect fit for your drums > (adjusted to measures of the drums' inside diameter). This ensures 100% > contact from Day 1, instead of wearing the bands in over the first 1000 > miles. > > Narve > C-300 in Norway > (fresh snow today) > > -----Opprinnelig melding----- > Fra: Rich Barber [mailto:barber@xxxxxxxxx] > Sendt: 5. mars 2005 02:39 > Til: Roger Schaaf > Kopi: Chrysler 300 list service > Emne: Re: [Chrysler300] Master Cylinder-1955 C300 > > > > Roger: > > I hope to see you there, but my information has the Pleasanton show on > March 19-20. My cell phone number is 925-783-4893 and I have requested > a spot inside. No response from GoodGuys on that. The bloody monsoon > season is still upon us. > > The master cylinder kit issue has become very interesting. Apparently, > the 1955 power brake system was a one year only design and is much > different from others. I don't fully understand it and the car and shop > manual are at the brake shop so I am unable to do much research. The > expensive rebuilds apparently involve the total master cylinder system, > including the tin booster and iron portionss. Before teardown, braking > was very poor with two feet on the pedal required. We shall see what > all new shoes does for this as the front brake shoes were saturated with > brake fluid and old grease. It may be that it is time to take the > system in for a rebuild, but I will probably wait until after the > Pleasanton show to do this. > > I have seen some information that there used to be a pretty minimal > rebuild kit for the iron part of the master cylinder and that there are > no wear parts or surfaces to corrode. > > Maybe I need a Jake Brake or a boat anchor. > > Rich Barber > Brentwood, CA > 1955 CCC > > Roger Schaaf wrote: > >>Rich: >> >>I am planning to attend the Pleasanton Goodguys show next weekend. If the >>weather is decent I will be displaying the B. If you should make it, give >>me a call on my cell phone. Cell number 408-799-3333. Hope to see you >>and >>your 55. You too Mr. Jasinski and Mr. Jett. >> >>I got a master cylinder for my B at Napa. Not a kit, but new cylinder. > But >>that was 16 years ago. >> >> >> >> > > > > > > To send a message to this group, send an email to: > Chrysler300@xxxxxxxxxxxxxxx > > For list server instructions, go to > http://www.chrysler300club.com/yahoolist/inst.htm > Yahoo! Groups Links > > > > > > > > > > > To send a message to this group, send an email to: > Chrysler300@xxxxxxxxxxxxxxx > > For list server instructions, go to > http://www.chrysler300club.com/yahoolist/inst.htm > Yahoo! Groups Links > > > > > > ------------------------ Yahoo! Groups Sponsor --------------------~--> Help save the life of a child. Support St. Jude Children's Research Hospital's 'Thanks & Giving.' http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/8LmulB/TM --------------------------------------------------------------------~-> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/