[Chrysler300] Power steering help.... please

["George McKovich" <george@xxxxxxxxxxxx>]

Hello all...
A couple months ago, I posted the following message and got
back some interesting ideas as to what the problem might be.
I believe I have determined that it is not the p/s pump,
because it is still stuck-siezed when the engine is not
running, both hoses are disconnected and the front wheels
are off the ground. I have looked through the factory
service manual and do not find any troubleshooting portion
relating to this type of problem. Has anyone else out there
had the same problem or know what the problem could be??

Thanks
George

> Maybe someone out there has the answer.... I hope so. My
57 300C power 
> steering acts like it is seized up when I start the car
after it has 
> set for several days. You literally cannot move the
steering wheel 
> even a fraction of an inch. After the engine run for
several minutes, 
> you can start to turn the wheel back and forth a little
bit and 
> finally it completely frees itself and can be turned as
you would
> expect. Any suggestions of what the problem may be?? It is
a
> newly rebuilt PS pump.



[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Give the gift of life to a sick child. 
Support St. Jude Children's Research Hospital's 'Thanks & Giving.'
http://us.click.yahoo.com/5iY7fA/6WnJAA/Y3ZIAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/