[Chrysler300] FW: 57 300C Exhaust

[<john_nowosacki@xxxxxxxxxxx>]

-----Original Message-----
From: NOWOSACKI,JOHN (A-USA,ex1) 
Sent: Thursday, July 21, 2005 8:19 AM
To: 'Chrysler300@xxxxxxxxxxxxxxx'
Subject: 57 300C Exhaust


Hi group,
I'm currently having a valve job done on my 392 heads, and I keep looking at these puny exhaust manifolds that the 392 dual quad hemi is trying to breathe through, and I'm wondering if it makes sense to try and locate something better.
I've heard there are Dodge truck manifolds that will bolt right up and breathe better, but I don't know the numbers or if any are available.  I also looked at the Hotheads website and there appear to be 'block hugger' headers made for the 392 for street rod use.
Anyone have any opinions/ideas/experience in this matter?
It's not like I'm going to ever race the car, but these tiny stock manifolds just look too restrictive to put back on without asking the question.
John


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/