Re: [Chrysler300] Tires & speed
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Tires & speed



Hi Jim et al,

Mac The Hammer seems to be an appropriate handle for you!

What options would those of us who have 14 inch tires have in tires even if
they are black wall or green wall?

9.00x14 or 235/75R14 or there about? Bias Ply or Radial? At what rating?

T.



From: James McMullan <macthehammer@xxxxxxxxxxxxx>
Reply-To: <macthehammer@xxxxxxxxxxxxx>
Date: Sat, 23 Jul 2005 19:49:04 -0700
To: Listserver <Chrysler300@xxxxxxxxxxxxxxx>
Subject: [Chrysler300] Tires & speed

Are Letter cars have 150 mile per hour spedomerers.The legion I have always
heard was they were guarantied to pin that unit off the showroom floor (
After break in ) and they were accurate within 1%. The best I ever did was
146 indicated.It was still puling but I was running out of road (traffic
ahead) and was also worried about the tires.900x14 byas- ply 4 ply nylon but
well used.Has any one on the list burred the needle? The reason I bring this
up is there has bean a lot of chatter about tires in the last 6 months. but
speed rating is never mentioned! People are concerned about the whit wall
and the look.I cant see putting a 90 mile per hour tire on a 150 m.p.h car .
My F has a 292 rear cog,413 bored ,060 over (427 c.i) and at that speed was
tacking 63-66 hundred r.p.m.bouncing a LOT.Now before you all start yelling
Go to silverstateclassic.com. you can also go back through the years and see
what the letter cars did in the past..Fast cars should be driven Fast.And by
the the fins do apply down force at about 120 m.p.h. When I get the F on the
road I will be going with V rated ,and don't care if they are Green Wals.Jim
McMullan 300 F


James McMullan
macthehammer@xxxxxxxxxxxxx
Why Wait? Move to EarthLink.

[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

  

 
 SPONSORED LINKS 
          
  Chrysler 300 
<http://groups.yahoo.com/gads?t=ms&k=Chrysler+300&w1=Chrysler+300&w2=Chrysle
r+sebring&w3=Chrysler+town+country&w4=Club+international&c=4&s=91&.sig=d86Gm
Um7e3_5KsMobowepg>    Chrysler sebring
<http://groups.yahoo.com/gads?t=ms&k=Chrysler+sebring&w1=Chrysler+300&w2=Chr
ysler+sebring&w3=Chrysler+town+country&w4=Club+international&c=4&s=91&.sig=4
BJoQwP-IEzKZSHlRYlQTA>    Chrysler town country
<http://groups.yahoo.com/gads?t=ms&k=Chrysler+town+country&w1=Chrysler+300&w
2=Chrysler+sebring&w3=Chrysler+town+country&w4=Club+international&c=4&s=91&.
sig=uP_79yYiDX8Hw0-FaXdJ5w>
  Club international
<http://groups.yahoo.com/gads?t=ms&k=Club+international&w1=Chrysler+300&w2=C
hrysler+sebring&w3=Chrysler+town+country&w4=Club+international&c=4&s=91&.sig
=zCeaMCUVU03TfDtYjmWajg>
 
 

 YAHOO! GROUPS LINKS

*  Visit your group "Chrysler300 <http://groups.yahoo.com/group/Chrysler300>
" on the web. 
*   
*  To unsubscribe from this group, send an email to:
*  Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<mailto:Chrysler300-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
*   
*  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

 





[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.