RE: [Chrysler300] Gas tank dents

["Louis M. Barrie" <lmbarrie@xxxxxxxxxxxxx>]

Um...A gas tank gauge that is accurate?  Who has had experience with rebuilt
/ reproduction fuel sending units for the 300F and what works best?

Louis Barrie
West Hills, CA
Home of Big Yellow

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]On
Behalf Of lettercars@xxxxxxx
Sent: Friday, April 28, 2006 5:16 AM
To: schroe99@xxxxxxxxxxxx; chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] Gas tank dents



Hi Carlton:
I took my 300F tank to a local body shop.  They used whatever  procedures
they use on a car body to pull the dents out.  Mine were too  severe to use
the
air pressure technique.  Also, since I was returning the  tank to stock with
undercoating, appearance wasn't critical.  Anyway, the  tank looks ok and
doesn't leak---at least not yet.  What more could one ask  for? Ha.   300ly,
Gil
Cunningham


In a message dated 4/28/2006 8:07:13 AM Eastern Standard Time,
schroe99@xxxxxxxxxxxx writes:

Good  morning,

Does anyone have a method for removing gas tank dents?   I'm not dealing
with
any severe kinks or bends just a large dent that would  probably push or
hammer out quite easily if I could get at it.  Has  anyone tried air
pressure?
The tank is very solid and other than the  dent in good shape.

Thanks,







[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
Yahoo! Groups Links










To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/