[Chrysler300] Re: worn ball/trunion

[mjraguse@xxxxxxx]

In a message dated 5/29/2006 6:10:33 PM Eastern Daylight Time, 
crossram@xxxxxxxxxxxxx writes:
I believe that Mopar made a fixture to that effect which allows insertion of
the pin only to a certain, speciic depth . 
John is correct.  I remember the shop here in Detroit had it and it 
controlled the press depth.  Also be sure and insect your housing.  Run your finger 
down the roller path and make sure it is smooth with no groove..I have seen 
unscrupulous sellers actually clean and package an old one in the box.  A worn 
roller path will soon be vibrating again. You must replace all of the parts at the 
same time.   


[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Everything you need is one?click away.? Make Yahoo! your home page?now.
http://us.click.yahoo.com/AHchtC/4FxNAA/yQLSAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/