Re: [Chrysler300] Kepich exhaust for 300E

[Dave <dintym@xxxxxxxxx>]

I read in one of emails (about 3 down from the top) that this vendor was on our website.  If he is on there as resource and he is that bad, why keep a link for him?
 
"...It was about 3' to long I used 
Kepich
Exhaust they were in the clubs listing for resources..."
 
Dave Moore

----- Original Message ----
From: "D'Aloise, Lawrence Jr." <ldaloise@xxxxxxxxxx>
To: John J. Hertog <crossram@xxxxxxxxxxxxx>; chrysler300@xxxxxxxxxxxxxxx; jdelrae1 <jdelrae1@xxxxxxx>
Sent: Monday, September 18, 2006 8:46:09 AM
Subject: RE: [Chrysler300] Kepich exhaust for 300E

I have had a very bad experience with Kepich.I ordered an exhaust system
from him for my 300D convert. None of the pipes came close to fitting.
They were so far off they could not be made to fit by my experienced
exhaust man. Kepich refused to stand by his product & was very nasty
when I spoke to him several times. He insisted his pipes were right even
after I sent him pictures showing a side by side comparison between the
pipes that came off the car & his pipes. I strongly recommend that you
do not deal with this company.

Larry D'Aloise 

-----Original Message-----
From: Chrysler300@ yahoogroups. com [mailto:Chrysler300@ yahoogroups. com]
On Behalf Of John J. Hertog
Sent: Monday, September 18, 2006 8:16 AM
To: chrysler300@ yahoogroups. com; 'jdelrae1'
Subject: [Chrysler300] Kepich exhaust for 300E

Hi Jim, and all

Jim, you are now hitched up to the listserver. Welcome aboard. As far
as Kepich, I think the feedback you will receive from most folks is that
they are pretty bad... both in terms of their product, and also their
attitude.

Any comments from membership? what would be a good source for 300E
exhaust system ?


John 



_____ 

From: jdelrae1 [mailto:jdelrae1@cox. net]
Sent: Sunday, September 17, 2006 9:42 PM
To: John J. Hertog
Subject: Re: Hello

Hello John,
Thanks for the information. . I did end up figuring out the system I
ordered was not the correct system. It was about 3' to long I used
Kepich
Exhaust they were in the clubs listing for resources. I'll keep you
posted
on how this turns out. I am not real happy with them so far since I
called
them on Saturday when I was having problems and he said they were closed
and
to call back on Monday?
Thanks!
Jim

----- Original Message ----- 
From: John J. <mailto:crossram@optonline. net> Hertog 
To: 'jdelrae1' <mailto:jdelrae1@cox. net> 
Cc: 'Bob Merritt' <mailto:bob@simplexco. com> 
Sent: Sunday, September 17, 2006 7:09 PM
Subject: RE: Hello

Hi Jim,

We should have you up and runnign on the listserver tomorrow (Monday) .
In
the interim, I posted your question to the group, and rec'd this
response
from Steve Albu:


Jim, you might want to let the club members know from whom you obtained
the
exhaust system. With some rare exceptions, when you order these systems
through the mail, they will not fit most of the time. The bends are
critical, and it takes someone with good equipment and skill to make
them
mail order. 
Steve Albu



---- "John J. Hertog" <crossram@optonline .
<BLOCKED::mailto:crossram@optonline. net> net> wrote: 
> Hi to all, 
> 
> Jim is a new member.. can someone please help him with regards to his
> question? 
> 300'ly to all
> 
> John Hertog
> Sag Harbor NY
> 
> _____ 
> 
> From: jdelrae1 [mailto:jdelrae1@ cox.
<BLOCKED::mailto:jdelrae1@cox. net>
net] 
> Sent: Sunday, September 17, 2006 5:11 PM
> To: John J. Hertog
> Subject: Hello
> 
> 
> Hello John,
> I was wondering if you had or knew anybody that may have a photo of
the
> under carriage of a 59E. I purchased an exhaust system for my E and am
at
> wits end trying to install it. Mine did not have a system when I
purchased
> it and the new system had no information when I received it. Spent the
last
> 2 day re configureing the pieces to the new system and am still
> unsuccessfull getting this mess together. Any information would be
> appreciated.
> Thanks,
> Jim DelRae
> 

_____ 

From: jdelrae1 [mailto:jdelrae1@cox. net] 
Sent: Sunday, September 17, 2006 5:11 PM
To: John J. Hertog
Subject: Hello

Hello John,
I was wondering if you had or knew anybody that may have a photo of
the
under carriage of a 59E. I purchased an exhaust system for my E and am
at
wits end trying to install it. Mine did not have a system when I
purchased
it and the new system had no information when I received it. Spent the
last
2 day re configureing the pieces to the new system and am still
unsuccessfull getting this mess together. Any information would be
appreciated.
Thanks,
Jim DelRae

[Non-text portions of this message have been removed]

To send a message to this group, send an email to:
Chrysler300@ yahoogroups. com

For list server instructions, go to
http://www.chrysler 300club.com/ yahoolist/ inst.htm

For archives go to http://www.forwardl ook.net/300- archive/ 
Yahoo! Groups Links


 

[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/