[Chrysler300] exhaust for 300F/G

["Vath, Michael J." <Michael.Vath@xxxxxxxxxxxxxx>]

Happy Monday from GA. 
Where do y'all get the small diameter exhaust flange/pipe for the ram cars?
(the intake plenum area heating pipes)
Many thanks! vath

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Henry Hopkins
Sent: Monday, September 18, 2006 1:00 PM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] Kepich exhaust for 300E


We say some good, some bad.  Bit faster than others but we've had problems 
with the header pipe on one.  Now we have a local shop make up and install a

system.  In the past, installing the kits ourselves didn't work because 
bends were not quite right, pipes hitting the frame, etc.  Had to bang dents

in the pipes here and there to stop the pipes hitting the frame after 
getting tired of the rattles.

Our two cents, Henry Hopkins/Richard Palmer
----- Original Message ----- 
From: "John J. Hertog" <crossram@xxxxxxxxxxxxx>
To: <chrysler300@xxxxxxxxxxxxxxx>; "'jdelrae1'" <jdelrae1@xxxxxxx>
Sent: Monday, September 18, 2006 5:16 AM
Subject: [Chrysler300] Kepich exhaust for 300E


> Hi Jim,  and all
>
> Jim, you are now hitched up to the listserver.  Welcome aboard.  As 
> far as Kepich, I think the feedback you will receive from most folks 
> is that they are pretty bad... both in terms of their product, and 
> also their attitude.
>
> Any comments from membership?  what would be a good source for 300E
> exhaust
> system ?
>
>
> John
>
>
>
>  _____
>
> From: jdelrae1 [mailto:jdelrae1@xxxxxxx]
> Sent: Sunday, September 17, 2006 9:42 PM
> To: John J. Hertog
> Subject: Re: Hello
>
>
> Hello John,
>  Thanks for the information..  I did end up figuring out the system I 
> ordered was not the correct system.  It was about 3' to long I used 
> Kepich Exhaust they were in the clubs listing for resources.  I'll 
> keep you posted on how this turns out.  I am not real happy with them 
> so far since I called
> them on Saturday when I was having problems and he said they were closed 
> and
> to call back on Monday?
> Thanks!
> Jim
>
> ----- Original Message -----
> From: John J.  <mailto:crossram@xxxxxxxxxxxxx> Hertog
> To: 'jdelrae1' <mailto:jdelrae1@xxxxxxx>
> Cc: 'Bob Merritt' <mailto:bob@xxxxxxxxxxxxx>
> Sent: Sunday, September 17, 2006 7:09 PM
> Subject: RE: Hello
>
> Hi Jim,
>
> We should have you up and runnign on the listserver tomorrow (Monday) 
> .
> In
> the interim, I posted your question to the group, and rec'd this response
> from Steve Albu:
>
>
> Jim, you might want to let the club members know from whom you 
> obtained
> the
> exhaust system. With some rare exceptions, when you order these systems
> through the mail, they will not fit most of the time. The bends are
> critical, and it takes someone with good equipment and skill to make them
> mail order.
> Steve Albu
>
>
>
> ---- "John J. Hertog" <crossram@optonline. 
> <BLOCKED::mailto:crossram@xxxxxxxxxxxxx> net> wrote:
>> Hi to all,
>>
>> Jim is a new member.. can someone please help him with regards to his 
>> question? 300'ly to all
>>
>> John Hertog
>> Sag Harbor NY
>>
>> _____
>>
>> From: jdelrae1 [mailto:jdelrae1@cox. 
>> <BLOCKED::mailto:jdelrae1@xxxxxxx>
> net]
>> Sent: Sunday, September 17, 2006 5:11 PM
>> To: John J. Hertog
>> Subject: Hello
>>
>>
>> Hello John,
>> I was wondering if you had or knew anybody that may have a photo of 
>> the under carriage of a 59E. I purchased an exhaust system for my E 
>> and am at wits end trying to install it. Mine did not have a system 
>> when I purchased it and the new system had no information when I 
>> received it. Spent the
> last
>> 2 day re configureing the pieces to the new system and am still 
>> unsuccessfull getting this mess together. Any information would be 
>> appreciated. Thanks,
>> Jim DelRae
>>
>
>
>  _____
>
> From: jdelrae1 [mailto:jdelrae1@xxxxxxx]
> Sent: Sunday, September 17, 2006 5:11 PM
> To: John J. Hertog
> Subject: Hello
>
>
> Hello John,
>  I was wondering if you had or knew anybody that may have a photo of 
> the under carriage of a 59E.  I purchased an exhaust system for my E 
> and am at wits end trying to install it.  Mine did not have a system 
> when I purchased it and the new system had no information when I 
> received it.  Spent the last
> 2 day re configureing the pieces to the new system and am still
> unsuccessfull getting this mess together.  Any information would be
> appreciated.
> Thanks,
> Jim DelRae
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To send a message to this group, send an email to: 
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
> http://www.chrysler300club.com/yahoolist/inst.htm
>
> For archives go to http://www.forwardlook.net/300-archive/
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> 



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links






 





Please visit us online at:  <html><a href="http://www.bluelinxco.com";>http://www.bluelinxco.com</a></html>

******* BlueLinx Corporation Internet E-mail Confidentiality *******

This message and all attachments may contain information which is privileged and confidential. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you believe you have received this message in error, please forward to
 <A href="mailto:Postmaster@xxxxxxxxxxxxxx";> Postmaster@xxxxxxxxxxxxxx</A>

[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/