Re: [Chrysler300] Kepich exhaust for 300E

["rob kern" <robkern@xxxxxxxxxxxxx>]

Jim, et al,
    My experience with Kepich was less than stellar.  The C exhaust pipes 
needed extensive modification to fit correctly and the mufflers didn't last 
more than 2500 miles for the first set and 25 miles for the second set. 
Then the dude stated that my car was backfiring and that my heat riser on 
the driver's side was stuck (wrong, it is on the passenger side) and that's 
when I told him to go take a hike. ROB KERN
----- Original Message ----- 
From: "John J. Hertog" <crossram@xxxxxxxxxxxxx>
To: <chrysler300@xxxxxxxxxxxxxxx>; "'jdelrae1'" <jdelrae1@xxxxxxx>
Sent: Monday, September 18, 2006 7:16 AM
Subject: [Chrysler300] Kepich exhaust for 300E


> Hi Jim,  and all
>
> Jim, you are now hitched up to the listserver.  Welcome aboard.  As far as
> Kepich, I think the feedback you will receive from most folks is that they
> are pretty bad... both in terms of their product, and also their attitude.
>
> Any comments from membership?  what would be a good source for 300E 
> exhaust
> system ?
>
>
> John
>
>
>
>  _____
>
> From: jdelrae1 [mailto:jdelrae1@xxxxxxx]
> Sent: Sunday, September 17, 2006 9:42 PM
> To: John J. Hertog
> Subject: Re: Hello
>
>
> Hello John,
>  Thanks for the information..  I did end up figuring out the system I
> ordered was not the correct system.  It was about 3' to long I used Kepich
> Exhaust they were in the clubs listing for resources.  I'll keep you 
> posted
> on how this turns out.  I am not real happy with them so far since I 
> called
> them on Saturday when I was having problems and he said they were closed 
> and
> to call back on Monday?
> Thanks!
> Jim
>
> ----- Original Message ----- 
> From: John J.  <mailto:crossram@xxxxxxxxxxxxx> Hertog
> To: 'jdelrae1' <mailto:jdelrae1@xxxxxxx>
> Cc: 'Bob Merritt' <mailto:bob@xxxxxxxxxxxxx>
> Sent: Sunday, September 17, 2006 7:09 PM
> Subject: RE: Hello
>
> Hi Jim,
>
> We should have you up and runnign on the listserver tomorrow (Monday) . 
> In
> the interim, I posted your question to the group, and rec'd this response
> from Steve Albu:
>
>
> Jim, you might want to let the club members know from whom you obtained 
> the
> exhaust system. With some rare exceptions, when you order these systems
> through the mail, they will not fit most of the time. The bends are
> critical, and it takes someone with good equipment and skill to make them
> mail order.
> Steve Albu
>
>
>
> ---- "John J. Hertog" <crossram@optonline.
> <BLOCKED::mailto:crossram@xxxxxxxxxxxxx> net> wrote:
>> Hi to all,
>>
>> Jim is a new member.. can someone please help him with regards to his
>> question?
>> 300'ly to all
>>
>> John Hertog
>> Sag Harbor NY
>>
>> _____
>>
>> From: jdelrae1 [mailto:jdelrae1@cox. <BLOCKED::mailto:jdelrae1@xxxxxxx>
> net]
>> Sent: Sunday, September 17, 2006 5:11 PM
>> To: John J. Hertog
>> Subject: Hello
>>
>>
>> Hello John,
>> I was wondering if you had or knew anybody that may have a photo of the
>> under carriage of a 59E. I purchased an exhaust system for my E and am at
>> wits end trying to install it. Mine did not have a system when I 
>> purchased
>> it and the new system had no information when I received it. Spent the
> last
>> 2 day re configureing the pieces to the new system and am still
>> unsuccessfull getting this mess together. Any information would be
>> appreciated.
>> Thanks,
>> Jim DelRae
>>
>
>
>  _____
>
> From: jdelrae1 [mailto:jdelrae1@xxxxxxx]
> Sent: Sunday, September 17, 2006 5:11 PM
> To: John J. Hertog
> Subject: Hello
>
>
> Hello John,
>  I was wondering if you had or knew anybody that may have a photo of the
> under carriage of a 59E.  I purchased an exhaust system for my E and am at
> wits end trying to install it.  Mine did not have a system when I 
> purchased
> it and the new system had no information when I received it.  Spent the 
> last
> 2 day re configureing the pieces to the new system and am still
> unsuccessfull getting this mess together.  Any information would be
> appreciated.
> Thanks,
> Jim DelRae
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
>
> For archives go to http://www.forwardlook.net/300-archive/
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> 



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/