[Chrysler300] E,F wheel cover centres

["tdcox" <tdcox@xxxxxxxxxxxxx>]

http://www.chrysler300club.com/tech/f-hubcap/hubcapmain.html

 

This is the procedure as per John Hertog.  It works quite well, but good
luck on saving the insert.

 

 

What's the trick for removing the "gear" centre with the 300 emblem 
insert, after removing the 3 bolts on the back of the wheel cover. 
Applying considerable force with various levers & screwdrivers doesn't 
have any effect. Don't want to break the gear centre piece. Is WD 40 or 
something recommended? Assuming I get them off, any recommendations on 
what type of cleaner workse best on the gear. Thks

 



[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/