[Chrysler300] Ram K Question

[News4ge@xxxxxxx]

Hi, All,
 
When I had the rams on (before taking them off to rebuild the engine),  there 
were vacuum leaks where the manifolds met the heads.  This may have  been 
caused by the rams being off slightly from the correct angle, due to  various 
blockoff plates and gaskets I tried on the heat tubes.  
 
To avoid this problem from recurring, I'm looking for a way to seal it  
better.  Fel Pro has intake gaskets which go with their valley cover.   Is this ok? 
 Or is there a sealer, other than silicone, which will form a  bead to fill 
whatever gaps there may be?
 
Thanks,
 
George Clineman



************************************** See what's free at http://www.aol.com.


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/