[Chrysler300] 58 D Radiator@ Fuel Tank questions

["Marianne" <marianne@xxxxxxxxxxxxxxxxxx>]

Hello letter car list gang

 

I have a couple of questions: My radiator top tank has a number 175 4873
then M7.  This is on a 58 D; it also has a larger section square type
protuberance on the top. I chased down another radiator, but it is fully
curved on the top tank, it also has a number 175 4199. I figured the 175
4873 might be closer as correct for the 58, then I spotted another
radiator in a pic of a D with 175 4875.

 

Can you guys shed some light on the correct radiator?

 

Also, my rusty fuel tank seems deeper in the lower section than a
replacement one I sourced, which is shallower (painted green?) and has a
smaller bung plug, with a channeled type reservoir through the middle to
the bung.

 

I figure the 58 tanks were deeper? Or was it just the letter car tanks
bigger in bottom half? Any clues on the deal with these tanks? I might
have to source a more correct tank.

 

Hope all is well.

 

Best regards

 

Sean in OZ

 

300B &D

 

 

P.S.,anyone know anybody who would have a full set of ac pulleys? Twin V
on all accessories, 4v on main drive pulley?  

            

 

 

 



IMPORTANT: This email is intended only for the person(s) to which it is 
addressed and may contain confidential or legally privileged material. Any 
dissemination or other use of or taking of any action in reliance upon the 
content of this email by person(s) other than the intended recipient is 
prohibited. If you received this in error, please contact the sender and 
delete the email from any computer. Opinions and other information in this 
email that do not relate to the business of my employer are not given nor 
endorsed by it. Unencrypted email is not secure and may not be 
authentic. If you have any doubts as to the contents please telephone to 
confirm. Spray Nozzle Engineering / Reel - Tech and its related entities 
accept no responsibility for changes made to this email or its attachments 
after transmission from Spray Nozzle Engineering / Reel - Tech and its 
related entities and do not guarantee that this email or attachments are 
virus or error free. If you do not wish to receive further emails from us, 
please forward this email to sales@xxxxxxxxxxxxxxxxxxx



[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/