[Chrysler300] Re: Fuel sender ground

["Wayne Graefen" <wgraefen@xxxxxxx>]

I was afraid someone would ask how a fuel sender grounds without a jumper strap as begun at Chrysler in '60.
I don't know.
Actually I don't know how any tank is grounded without the jumper and virtually all other tanks are that way.  I guessing the jumper adds a positive additional ground in the picture because the fuel line is clamped to the frame.  
Without a jumper it would seem to me that the tank itself, plus the straps holding it to the frame, is being relied upon as the ground.  But when the straps are, as is often true (but not '57-59 Mopar) insulated from the tank by any webbing, then I wonder how the tank is going to ground.
Electronics is my weakest knowledge.
Someone give me a spark of wisdom please.

Wayne


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/