Ray, Carl, and Group. If you want um' all the same, pull the locks out of the doors, and the back end, and the ignition and go get-er-done. As for the same keyz for different years, tell yeah what I've learned the hard way. The change took place between '67 and '68. All 5 pin tumblers from '57 to '67. All 6 pin tumblers from '68 'til they went to the double cuts in the early or mid '80s. The rosettes are a different diameter (they won't fit in the handles) and the 6 pin tumbler mechanism is longer and larger. I ran into this with my '61 when I had to replace the ignition. I've got ah thing for the keyz with the crystal pentastar in um'. That key will fit the '57 to '67 tumbler even tho' the groves are a thousandth or two off and it's about an 1/8th" longer. My locksmith has been in the business a little over 50 years and just laughed at me when I suggested the keyz could be modified. I now carry two keyz. A crystal key for the ignition, and an original for the doors and the gate. Regards, Jerry --- Ray Jones <hurst300@xxxxxxxxxxx> wrote: > Take ALL the cylinders to a good locksmith and he > can key them to any > Mopar key you have, if it will go in the lock. All > the groves must be > the same. > Ray > > > On Aug 7, 2007, at 5:32 PM, Carl Westman wrote: > > Great Idea, Then I could have the same set of keys > as I have to the > Charger! > > Thanks! > > Carl > > Från: Chrysler300@xxxxxxxxxxxxxxx > [mailto:Chrysler300@xxxxxxxxxxxxxxx] > För > Bob Jasinski > Skickat: den 7 augusti 2007 22:15 > Till: 'Carl Westman'; Chrysler300@xxxxxxxxxxxxxxx > Ämne: RE: [Chrysler300] G Door locks > > Carl, > > I would take one of the lock cylinders to a > competent locksmith, he > should > be able to make a new key from that, or he can > re-key the cylinder(s). > > Bob > > _____ > > From: Chrysler300@xxxxxxxxxxxxxxx > <mailto:Chrysler300%40yahoogroups.com> > [mailto:Chrysler300@xxxxxxxxxxxxxxx > <mailto:Chrysler300%40yahoogroups.com> ] > On > Behalf Of Carl Westman > Sent: Tuesday, August 07, 2007 11:55 AM > To: Chrysler300@xxxxxxxxxxxxxxx > <mailto:Chrysler300%40yahoogroups.com> > Subject: [Chrysler300] G Door locks > > Hi all, > > I want to replace my locks on the G, as my keys > are lost, I could find > replacements for trunk and ignition on eBay, but > no locks for the > doors, if > I'm not totally off I think I picked-up from > someware that you could > modify > more common sets of door locks to fit, any > suggestions? > > Rgrds..Carl > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. > > [Non-text portions of this message have been > removed] > > [Non-text portions of this message have been > removed] > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. > > [Non-text portions of this message have been > removed] > > > > > [Non-text portions of this message have been > removed] > > > > To send a message to this group, send an email to: > Chrysler300@xxxxxxxxxxxxxxx > > For list server instructions, go to > http://www.chrysler300club.com/yahoolist/inst.htm > > For archives go to > http://www.forwardlook.net/300-archive/ > Yahoo! Groups Links > > > > > To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/