In a message dated 9/25/2007 12:01:57 A.M. Eastern Daylight Time, ronbo97@xxxxxxxxxxx writes: > Very interesting info. regarding the windshield upper molding. Recently (at the Lawton Meet) it was pointed out to me that the upper windshield stainless molding on my C was perhaps incorrectly mounted since the ends were affixed wirh screws. It appeared that the molding on the K was meant to be screwed down. as all of the pieces I have seen have the holes in the same spots. The screws are hidden by the side trim which overlaps the upper piece. The double sided tape is an insurance policy (at a very low cost). Pete ************************************** See what's new at http://www.aol.com [Non-text portions of this message have been removed] To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/