RE: [Chrysler300] Painting License Plates - Techniques???

["Dan Watts" <dan.watts@xxxxxxxxxxx>]

Ryan and All,

Starting on page 194 of December-Hemming's-"Services Offered", there are no
more than six companies offering to furnish and/or refinish license plates.
Word of caution, Hemming's seems to have problems with their alphabetical
listings, so it starts with Jim's Calif. License Plates, drops back to
Key's, Leaf Springs, a couple of Leather guys,  a License guy, a strip
joint, two License guys, can insurance, License guy, parking lift's. another
license guy, then on to lifts again.  

You gotta' watch those car magazine guys!!!  

Danny Watts

'60 Chrysler 300F

'61 Chrysler 300G "Survivor"  

 

  _____  

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Ryan Hill
Sent: Sunday, November 04, 2007 12:08 AM
To: Chrysler 300
Subject: [Chrysler300] Painting Licence Plates - Techniques???

 



I have 2 California cars with original black plates and I'm thinking of
restoring them. Can anyone tell me what technique was used to paint these
plates when they were produced? Does anyone have an acurate way of
reproducing the original look without painstaking brush work? 

I'm thinking of stripping the plates to bare metal, fixing the dings and
imperfections, priming and painting the black background. Then, using a
peice of cotton rag or perhaps felt wrapped over a short peice of 2 x 10,
applying yellow paint to it and lowering it onto the plate so it only
touched the raised areas.

Another method that was descibed to me was to paint many thin coats of the
yellow followed by the black, then once dry, wet sand the high spots off
with a rubber wet sand block and finally polish.

Any other ideas? I'm sure someone has done this before.

Ryan Hill (Vancouver, B.C.)
'65 Chrysler 300
'68 Dodge Charger

__________________________________________________________
Send a smile, make someone laugh, have some fun! Start now!
http://www.freemess <http://www.freemessengeremoticons.ca/?icid=EMENCA122>
engeremoticons.ca/?icid=EMENCA122

 



[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/