RE: [Chrysler300] Possible project
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Chrysler300] Possible project
- From: "Knutsen, Mark C" <Mark.Knutsen@xxxxxxxxxxxxxxxxxxxxx>
- Date: Wed, 28 Nov 2007 13:45:44 -0600
If possible, I really like the steering wheel idea.
- Mark Knutsen
________________________________
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]
On Behalf Of Vath, Michael J.
Sent: Wednesday, November 28, 2007 1:34 PM
To: 'john_nowosacki@xxxxxxxxxxx'; bob@xxxxxxxxxxxxx;
Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Possible project
Hooray for the restoration committee!
Nice ram block-offs & elbows are already reproduced/sold by JC Auto.
Custom top bows (but not arms) are currently available too; check with
George McKovich. I think he found someone good.
For 60 & up, how 'bout gas tanks?
-- or maybe help Mike Burke get steering wheels done faster/cheaper?
-- or sill plates?
-- or lower quarter patch panels?
-- or trunk lower trunk rain gutter patches?
The place that already produces floor & trunk pans (classic fab?) could
probably give us volume prices on the sheetmetal stuff....
Another good Club investment might be to buy a copy of Eileen Brass' ram
exhaust/heat tube pattern/jig. Her copies fit perfectly, but won't be
available forever..
On a exnerifically fanciful note, wouldn't it be dreamy to have an
inventory
of all the products available from George Laurie, Gary Goers and JC auto
under one roof? Add Mike Burke's neat stuff plus the current Club
offerings
and maybe a supply of windshields....
-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com>
[mailto:Chrysler300@xxxxxxxxxxxxxxx
<mailto:Chrysler300%40yahoogroups.com> ] On
Behalf Of john_nowosacki@xxxxxxxxxxx
<mailto:john_nowosacki%40agilent.com>
Sent: Wednesday, November 28, 2007 1:51 PM
To: bob@xxxxxxxxxxxxx <mailto:bob%40simplexco.com> ;
Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com>
Subject: RE: [Chrysler300] Possible project
I think I'd rather have convertible tops and top bows/arms, etc.
reproduced.
I worry about the metal parts of my top going up and down, whereas the
block
off plates haven't moved since 1961 and just sit there, so they should
never
need replacing.
________________________________
From: Chrysler300@ <mailto:Chrysler300%40yahoogroups.com>
yahoogroups.com
[mailto:Chrysler300@ <mailto:Chrysler300%40yahoogroups.com>
yahoogroups.com]
On Behalf Of Bob Merritt
Sent: Wednesday, November 28, 2007 1:15 PM
To: Chrysler300@ <mailto:Chrysler300%40yahoogroups.com> yahoogroups.com
Subject: [Chrysler300] Possible project
I have been asked to forward the following message:
+++++++++++++++
The Restoration Committee is considering reproducing the manifold
"block-off" plates for the '60, '61, '63 and '64 ram cars. Initial cost
projected for sale would be about $75.00 per pair plus postage.
We would like to get a response from the members to see if these would
be an
item they need.
The Restoration Committee
+++++++++++++++
You can forward replies to me and I will aggregate, accumulate, spindle
fold
and mutilate. I am especially good at folding.
Rrr
[Non-text portions of this message have been removed]
Please visit us online at: <html><a href="http://www.bluelinxco.com
<http://www.bluelinxco.com> ">http://www.bluelinxco.com
<http://www.bluelinxco.com> </a></html>
******* BlueLinx Corporation Internet E-mail Confidentiality *******
This message and all attachments may contain information which is
privileged and confidential. If you are not the intended recipient, you
are hereby notified that any dissemination, distribution or copying of
this communication is strictly prohibited. If you believe you have
received this message in error, please forward to
<A href="mailto:Postmaster@xxxxxxxxxxxxxx
<mailto:Postmaster%40bluelinxco.com> "> Postmaster@xxxxxxxxxxxxxx
<mailto:Postmaster%40bluelinxco.com> </A>
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Chrysler300/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:Chrysler300-digest@xxxxxxxxxxxxxxx
mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap