Re: [Chrysler300] 4006452 heads on a 383 engine

[William Huff <whuff@xxxxxxxxxx>]

Hi Mark,

You can buy push rods in any length you want from Crane and other 
manufacturers.  They even have a tool for measuring the proper 
length.  I would think that later 383 push rods would fit?

One thing to be aware of is that 1966 was the last year for the push 
rods with the indented tip to fit that hydraulic lifter.  If you get 
newer style push rods, you may have to change over to the newer lifters.

Bill Huff

At 2/2/200802:05 PM, Mark Lindahl wrote:

>Good Afternoon,
>
>I tried to install some 4006452 heads on my '63 383 engine and I 
>find that the pushrods that I have for the 383 and some for a 413 
>are too short. Does anyone know if they make push rods for this combination?
>
>The pedistals for the 452 heads are higher than the original heads 2206324.
>Now I don't know the length of the pushrods that are needed.
>
>I may just have the original 383 heads redone, but I was thinking of 
>using the open chamber heads.
>
>Thanks for your help, in advance. Right now, I'm stumped!
>
>Mark Lindahl
>
>[Non-text portions of this message have been removed]
>
>



[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/