Re: [Chrysler300] G Tachometer

["Richard Osborne" <richard@xxxxxxxxxxxx>]

Val,

It's probably the tach cable that is making noise. It may just need to be lubed. This is best done by removing cable from distributor and holding that end up high while adding lube. Otherwise, you need to access the back of the tach from underneath the dash. You need to unsnap the cloth and the top part of the fibre console. It you want to replace it, Imperial Services sells very nice reproductions.

Good luck,

Richard Osborne

>>> Val Jeffers <edward1108@xxxxxxxxx>  >>>
Just started making a loud grinding noise. How best to remove? If broken does anyone have one ?
   
   
                                                                                        Thanks,
                   
                                                                                        Val Jeffers

       
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.

[Non-text portions of this message have been removed]




To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/