RE: [Chrysler300] '56 300B lower Grill molding

["Dan Elliott" <us@xxxxxxxxxx>]

If anyone has the driver's side door solex, I need that.

thanks,

Dan Elliott

  -----Original Message-----
  From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]On
Behalf Of Rich Barber
  Sent: Friday, March 28, 2008 12:10 PM
  To: 'hmpirish'; chrysler300@xxxxxxxxxxxxxxx
  Subject: RE: [Chrysler300] '56 300B lower Grill molding


  Is this piece the same on 1955 C-300's and 1956 300B?

  Several members advised me that the rear window on my C-300 could not be
  delaminated since it was single piece of glass. Inspection confirmed the
  apparent delamination was stubborn old crud from the rubber molding. I did
  a little survey of the glass in the C-300 and found the following. Some of
  the little numbers were hard to read. Any corrective editing appreciated.

  Front windshield: PPG-SOLEX-DUPLATE AS1 35
  Both vent windows: PPG-SOLEX-HERCULITE AS2 9 64
  Driver's door: PPG-SOLEX-DUOLITE AS2 9 1 (?)
  Passenger's door: LOF-SAFETY E-Z EYE-AS2 CCX LAMINATED
  LR quarter: PPG-SOLEX-HERCULITE-AS2 9 16
  RR quarter: PPG-SOLEX-HERCULITE-AS2 6 25
  Rear window: PPG-SOLEX-HERCULITE-AS2 4 25

  It appears the windshield and door glass are laminated while the vent,
  quarter and back windows are not. That makes sense from a safety
  standpoint. Apparently the passenger's side glass was replaced at some
time
  in our car. AS1 and AS2 look like some standard--American Standard? I
  would like to replace the passenger door glass with a PPG Solex piece if
  anyone has an extra.

  My wife got T-boned on the driver's side of our 1967 Plymouth and I think
  that glass was crumbly, not laminated. She got quite a bit of that
  shattered safety glass in the side of her face. Laminated might have been
  better.

  C-300'ly,
  Rich barber
  Brentwood, CA
  1955 Chrysler C-300

  -----Original Message-----
  From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
  Behalf Of hmpirish
  Sent: Friday, March 28, 2008 10:51 AM
  To: chrysler300@xxxxxxxxxxxxxxx
  Subject: [Chrysler300] '56 300B lower Grill molding

  Hello 300 Fans, On E-Bay there appears to be the most elusive part for a
  300B - the chrome trim piece below the grills and above the front bumper !
!
  ! I have have never seen this piece available in 30 years of
  looking for parts for 56 Chryslers. I am certain there are
  several 300Bs in the club that lack this piece - Now may be your only
  chance. I know nothing about the seller and have no other knowledge, save
  what is there. E-Bay id is 130209511760
  All the Best 300ing ! Phil
  Irish

  [Non-text portions of this message have been removed]

  ------------------------------------

  To send a message to this group, send an email to:
  Chrysler300@xxxxxxxxxxxxxxx

  For list server instructions, go to
  http://www.chrysler300club.com/yahoolist/inst.htm

  For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups
  Links



  


[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/