[Chrysler300] '57 & '58 300 trunklid insulation factory assembly, how'd they do it....

["Owen Grigg" <ram300@xxxxxxxxxx>]

Hi All

Whilst working on my 300C I was just curious to know how the factory put
together the trunk lid assembly. The factory installed insulation appears to
be in one large sheet, not cut to fit the holes. There is no overspray from
the trunk lid frame on the insulation material, surely the factory did not
mask the inside of the trunk to spray the frame and avoid the insulation
pad. All I can come up with is the frame and outer trunk skin were painted
before joining the two together and sandwiching the insulation pad, sounds
like a roundabout way of doing it? 

 

Anyone know how they did it, would put my mind at rest.

 

Thanks

Owen

Auckland,NZ

 



[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/