[Chrysler300] dashboard help

["mindrgn127@xxxxxxxxxxx" <minddrgn127@xxxxxxxxxxx>]

Hello to all,

 

Hope everyone is doing well. I have a 1966 chrysler 300 that when I bought
it the needle on the speedometer would only go up to 47 mph and the odometer
and trip do not work. The speedometer is very accurate up to 47 mph but it
does not go any higher. The trip is able to reset by spinning the knob under
the dash and works fine, but when it is driven the odometer and trip both do
not move the slightest. I had the dashboard apart as I needed to install a
new fuel gauge and ammeter and did not notice anything out of the ordinary.
This is an auto on the floor car so it does not have the gear selector on
it. I was wondering if anyone had any ideas what is going on and if there is
a fix so that I do not need to pull it apart again? Any help would be
appreciated. Thanks Jimmy



[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/