[Chrysler300] package shelf

[david dumais <dvd_dumais@xxxxxxxxx>]

I am currently fiber glassing the under side of the 64 shelf.     It is a slow process to build the dges and fill the cracks.     I think upon re-installion that the edges may have to be trimmed about 1/8 each side to slide into position.
   
  The contour is good, and the shelf did not melt or react to the resin/catalyst mix.  After trimming for fit, the edges may need to be sealed with resin.  
   
  The speaker grills that cracked and split may have to be cut out.   I need to find a decorative
  section for fill in.  7 1/2 x 10 1/2  dimension for the  square hole.
   
  best I can do for a  44 yer old fiber board.    Has any one tried this before?
   
                                      300K-ly     Dave  
   

       

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/