[Chrysler300] Overfill on Torqueflight

["Mark Lindahl" <mplindahl@xxxxxxxxxxxxx>]

Hi,

I had the ATF drained yesterday and refilled with Type F ATF.
The pan gasket was leaking, so I had that done and replaced the filter.

Upon inspection of the dipstick, it looks like they filled it about 1 inch over the max full line.
I assume this is not good, so I am going to bring it back.  
This problem is in addition to them breaking the spring for the Shifter/Park Lever.

Should I ask them to drain the torque converter to remove the fluid or any other suggestions?

300ly,
Mark Lindahl
'63 300 Conv.

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/