[Chrysler300] brakes and stuff

[kevin adams <kmotion45@xxxxxxxxx>]

trying to put brakes on my 62 sport. Has anyone out sucessfully put brakes from 74 to 78  chrysler onto these small ball joint cars and is there a cross over ball joint that will upsize but fit in the same hole in the lower arm to make this setup a bolt on? how about the lower arm on the late model? will it fit the earlier car. I can get this arrangement to fit but i"m trying to minimize my fabrication chore. Any info appreciated.. Also who has trnk floors for our cars? My 62 needs a complete one Kevin G,K,62 sport 


      

------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/